Two applications have been submitted to Poland's National Atomic Energy Agency for the assessment of small modular reactor technology. Copper and silver producer KGHM Polska Miedź SA's application is based on NuScale's VOYGR SMR power plant, while Orlen Synthos Green Energy's application concerns GE Hitachi Nuclear Energy's BWRX-300.

Two issues remain to be resolved before the UK's Office for Nuclear Regulation can issue a nuclear site licence for the proposed Sizewell C nuclear power plant in Suffolk, England. The first relates to the current ownership of the land on which the plant will be constructed, while the second relates to the current shareholder agreement.

A decision on whether to approve plans to build the proposed Sizewell C nuclear power plant has been delayed to 20 July - the announcement came the day before the original deadline.

The Foundation Preparation Pallas-reactor has applied to the nuclear regulator for a permit under the Nuclear Energy Act to construct and operate the Pallas research reactor in the Netherlands. It has also applied for a permit under the Water Act for the intake and discharge of cooling water for the reactor.

The upper section of the steel containment shell has been installed for the ACP100 small modular reactor demonstration project at the Changjiang nuclear power plant on China's island province of Hainan. The operation was completed 70 days ahead of schedule.

South Korea's government has laid out a new energy policy which aims to maintain nuclear's share of the country's energy mix at a minimum of 30% by 2030. It also calls for the construction of units 3 and 4 at the Shin Hanul nuclear power plant to resume after design work was suspended in 2017 due to uncertainties about government policy on the construction of new reactors.

The Environment Agency has launched a 12-week public consultation on its proposed decision to grant three permits relating to the planned Sizewell C nuclear power plant in eastern England in the UK. It says that each of the permits would be needed for the operation of the power station.

The Atomenergomash factory in Volgodonsk, Russia is manufacturing the bottom of the reactor pressure vessel for Turkey's Akkuyu 4.

The European Commission has launched an investigation into whether the planned public support for a new nuclear power plant at the existing Dukovany site in the Czech Republic complies with EU rules on state aid.

A major lift has put in place the inner dome on the second reactor at Bangladesh's Rooppur project. The work was completed more quickly than the same operation for unit 1 due to experience gained.

The Egyptian Nuclear and Radiological Regulatory Authority has issued a construction licence to the Nuclear Power Plants Authority for unit 1 of the planned four-unit El Dabaa nuclear power plant.

The first safety-related concrete has been poured for the nuclear island of unit 3 at the Sanmen nuclear power plant, China National Nuclear Corporation has announced. It marks the official start of construction of the first of two CAP1000 pressurised water reactors planned as Phase II of the site in China's Zhejiang province.